Tip Jar

NewTekスタジオ | メーリングリストに参加

NDI® Mobile Live Stream Studio Gear and Network Setup

May 02, 2018 by Chuck Baker

Michelle MacGregor, owner and video engineer at AVolution Productions/Pro Video Go, shares her take on a mobile live streaming setup, using NewTek NDI® to implement an IP workflow for live production of events. As part of the gear, two NewTek Connect Spark converters enable acquisition from HDMI cameras to NDI, a PTZOptics NDI PTZ camera rounds out the camera complement, and NDI-enabled WireCast running on a Mac is used for the streaming. Below this article are the complete network setup list and the complete gear list.

In addition to the video, she also spoke about NDI in a blog entry:

“NDI developed by NewTek, in my opinion, is going to take IP Video Networking by storm.” 

Michelle continues, “Live Video Streaming and NDI - no longer will you need external frame grabbers or traditional video encoders as NDI Protocol will take care of all of that for you. You will need an NDI encoder however which, as of now, you can find on the NewTek site or a third party developer by the name of BirdDog. Basically, depending on the device you choose, you have either HDMI or SDI Input options to NDI and then down the line via CAT6 and 1GB LAN. The Connect Spark from NewTek also allows for WiFi transmission. On the receiving end, there are multiple streaming programs that now accept NDI. For example; Wirecast, OBS, vMix, etc…”

Read the complete blog entry at AVolution Productions/Pro Video Go: NDI® – Network Device Interface & Live Event Streaming

更に詳しい情報を請求

Network setup list for Pro Video Go

Gear list for Pro Video Go NDI-based Live Stream mobile kit
PTZ Camera is controlled using a 3Dconnexion SpaceMouse.

NDI®, Live Streaming Tips, Live Production Tips, Camera Tips, NewTek Connect Spark,

NDI®, NewTek Connect Spark™, PTZOptics, PTZ Camera, WireCast, Live Streaming, Live Production, OBS, vMix, HDMI, SDI, Mac, Sienna, 3Dconnexion, SpaceMouse,


Related Stories

NewTek Connect Spark™: Adding Video Inputs to Your Production System

  NewTek Connect Spark™ makes video sources available to your production systems without taking up a physical input. Instead, Connect...

NewTek Connect Spark™: A Quick Introduction

Until now, video capture devices were limited to sending one video signal into one computer. NewTek’s Connect Spark™ uses NDI technology...

How to Update NewTek Connect Spark™ Firmware

NewTek Connect Spark™ can grow in capability as NewTek advances NDI, the royalty-free bi-directional IP technology for transporting media, metadata...

x
Chat with a Sales Specialist